Description

Overview

The NF-T29FHC is an OEM hydraulic filter for the T27, T27FH and T29FH (2022). It filters the hydraulic fluid as the fluid passes through the element. Therefore, it belongs in the service plan for those machines.

The page says this hydraulic filter should be changed every 500 hours. Also, add the change to your service schedule so the interval is not missed.

Also, clean the area around the filter housing before you open it. Dirt that falls into the hydraulic system can shorten the life of other components.

Hydraulic filter working principle

Fluid enters the inlet at the bottom of the tube. Then it passes from the inside to the outside through the filter element. Finally, it exits at the side outlet. When the pressure difference reaches the spring tension, the fluid bypasses the filter element.

Key features

• OEM hydraulic filter part
• Fits T27, T27FH and T29FH (2022)
• Change interval of 500 hours
• Inlet at the bottom with a side outlet
• Spring-set bypass limits the pressure rise

Also, the bypass opens only when the pressure difference reaches the spring tension. Therefore, follow the listed 500 hour change interval rather than waiting for the bypass to open.

Keep the change date in your records. Then, you can compare the interval with your hours and plan the next change before the filter is overdue.

Specifications

Confirm these figures before you order. Also, check the service interval on your machine.

• Fits: T27, T27FH, T29FH (2022)
• Change interval: every 500 hours
• Flow path: inlet at the bottom, outlet at the side

Compatibility

This hydraulic filter fits the T27, T27FH and T29FH (2022). Therefore, confirm your model and year before you order.

Hydraulic filter fit check

First, read the model on your machine. Next, check the 2022 note for the T29FH. Then, plan a change at 500 hours. For the full processor, see our NorthForest T29FHC firewood processor page. To learn more about this part type, read the Wikipedia article on oil filters.