Description

Overview

The Chainsaw Sproket (NF-T29) is a replacement chainsaw sprocket for the T29 FHC and FH Series. Use it when the sprocket on your chainsaw assembly needs replacing.

A sprocket is a toothed wheel that drives a chain. Therefore, a worn sprocket can make the chain slip or jump. Replace it to keep the drive steady.

Also, the sprocket works together with the chain as one drive system. Therefore, a worn sprocket can also shorten chain life. Inspect the chain at the same service as the sprocket.

Chainsaw sprocket for T29 drive work

For example, check the sprocket teeth for wear during service. Then, replace the chainsaw sprocket when the teeth look worn. Also, clean the chain drive area before you fit the new part.

Key features

• Replacement sprocket for T29 FHC and FH Series
• Toothed drive wheel for the chain
• NF-T29 part from NorthForest

Also, keep the sprocket and chain matched. Therefore, the drive stays in line with the T29 parts you already own.

For example, keep the part number and series with your service records. This helps you order the right sprocket next time without guessing.

Specifications

Confirm these figures before you order. The product page lists the series below.

• Series: T29 FHC and FH Series
• Part: NF-T29 sprocket replacement

Compatibility

The sprocket is listed for the T29 FHC and FH Series. Therefore, confirm your series before you order.

If your machine is not a T29 FHC or FH Series unit, do not order this part until you confirm the match. A wrong size can make the drive run poorly.

Chainsaw sprocket fit check

First, read the series on your machine. Next, match it with the T29 FHC or FH Series listing. Then, compare the teeth with the old sprocket. For the full processor, see our NorthForest T29FHC firewood processor page. To learn more about the drive part, read the Wikipedia article on sprockets.