Description

Overview

The Saw Chain is an OEM part for the T27 saw system. It is designed for 18 inch blades, so check the blade length before you order. Therefore, you can match this chain to your existing blade setup.

A saw chain is a loop of cutting links. It runs around the guide bar and cuts wood as the drive turns it. Also, a worn or damaged chain cuts slower and wastes time. Replace it when the teeth no longer cut cleanly.

Saw chain for replacement work

For example, a dull chain may leave fine dust instead of clean chips. Then, fit a new OEM chain to restore clean cuts. Finally, keep the bar and drive clean so the chain runs smoothly.

Also, check the chain tension after the first few cuts. A new chain can settle slightly, so a quick check keeps the bar and chain working together.

Key features

• OEM part for the T27 saw system
• Designed for 18 inch blades
• Replacement chain for routine saw maintenance
• Listed as a single replacement part

Also, keep the chain with the bar and drive parts you already use. Therefore, the saw keeps the same cutting setup after each change.

If you are unsure about the blade length, read it on your saw before you order. Then, match that length to the 18 inch design listed on this page.

Specifications

Confirm these figures before you order. The list repeats the details on the product page.

• Part type: OEM chain for the T27 saw
• Blade size: 18 inches

Compatibility

This saw chain is an OEM part for the T27. It is designed for 18 inch blades. Therefore, confirm the blade length on your saw before you order.

Saw chain fit check

First, measure the blade on your T27 saw. Next, compare it with the 18 inch design on this page. Then, check the chain against your bar before you fit it. For a related chain part, see our NF-T29-Chain product page. To learn more about the cutting element, read the Wikipedia article on chainsaw chain.