NF-T27-MP

Description

Overview

The NF-T27-MP is a dual hydraulic main pump for the North Forest T27. The product page names the pump for T27 and lists Parker as the pump make. Therefore, use this page to confirm the pump type and the machine before you order a replacement pump.

How a dual hydraulic main pump works

A hydraulic main pump moves oil from the tank into the hydraulic circuit, so the machine gets the pressure it needs. A dual pump has two pumping sections in one housing, which feed the circuit together. To read about the general design of hydraulic pumps, see the Wikipedia article on hydraulic pumps.

Before you start, switch off the machine and release the hydraulic pressure. Next, note the port positions and the hose routing on the old pump. Then fit the new pump, and check the mounting and the drive coupling. Finally, run the machine at low speed and check the pump and hoses for leaks and noise.

Care for the main pump

Keep the pump and the hydraulic oil clean, because dirt wears the pump parts. Check the hoses, fittings, and mounting bolts for leaks or looseness at regular intervals. For related parts and attachments, visit our accessories page.

Key features

• Dual hydraulic main pump
• Built for the T27 machine
• Parker pump listed on the product page

Also, these features help you match the pump to your machine. For example, the T27 line shows the machine it is listed for. So, check the pump make and the port layout before you order.

Specifications

The product page lists only the items below. No other values are added.

• Product name: NF-T27-MP
• Type: dual hydraulic main pump
• Machine: T27
• Pump make: Parker

Compatibility

The product page names the T27 for this pump. The page does not list the flow rate, the pressure rating, or the port sizes. Therefore, compare the pump with the old part, and confirm the model with your dealer before you order.