T27FH

The NorthForest T27 cuts and splits wood in one simple operation, it can produce over a 2 cords of cut firewood wood an hour.

The T27 can process logs up to 16” in diameter and can split to a maximum length of 24”

Operation of the unit is safe and simple, load your log onto the table, push into the processor, grab the saw bar handle, pull down and the saw bar grip and you are cutting through the log.

The processor cuts wood to the desired length and then automatically starts splitting.

The ram automatically pulls back, ready for the next cut.

The T27 has many features ensuring the safety of those operating the unit.

Safety Cages around all areas where the action is, if the safety cage over the splitter is opened the hydraulics will not operate.

The height adjustable front Tripod support balance insure stability when operating. 

The adjustable single wheel on the front drawbar makes it easy to roll around and to adjust height

-Unit has a toolbox for your wrenches to adjust the chain and keep maintenance up.

-Large Duplex Hydraulic pump  for quicker hydraulic speed.

-On the rear the T27 processor comes with a 128 » conveyor with a 10 wide re-inforced belt, the height and position

of the output conveyor can be adjusted easily with the winch so processed firewood can be loaded.

this conveyor can be folded in half in seconds for transport and storage.

-The T27 greatly improve production with optional NF-LD LiveDeck Hydraulic Roller Infeed or NF- Hydraulic Belt Infeed to make it easier to feed those

longer logs into the processor.

-Splitter Wedge is easily adjustable for different diameters of logs, just move the lever to the right position to cut logs in half or split them into four pieces.

– Wheels are 4 bolt mounting and the tires are 135/70R12 and use standard highway trailer bearings, the tires are rated for 70K