NF-T27/T29-Spring

Description

Overview

The 4264 is the NF-T27/T29-Spring, a return spring for North Forest T27 and T29 processors. The product page describes it as a return spring on T27/T29. Therefore, use this page to confirm the part and check the fit before you order a spring for your processor.

What a return spring does

A return spring pushes a moving part back to its rest position after it has moved. Springs like this help a lever or a linkage return to the start point, so the machine resets for the next cycle. To read about the general design of springs, see the Wikipedia article on springs.

Before you start, switch off the processor and disconnect the power source. Next, note how the old spring sits and which way it is wound. Then fit the new spring in the same position, and move the part by hand to check the return. Finally, run the processor slowly and check the spring again after the first use.

Care for the spring

Keep the spring area clean, and free of sawdust and bark. Check the spring for cracks, rust, or a loss of tension at regular intervals. For related parts and attachments, visit our accessories page.

Key features

• Return spring for T27 and T29 processors
• Listed part name: NF-T27/T29-Spring
• Returns the moving part to its rest position

Also, these features help you match the spring to your processor. For example, the T27 and T29 line shows the machines it is listed for. So, check the part name before you order.

Specifications

The product page lists only the items below. No other values are added.

• Part name: NF-T27/T29-Spring
• Type: return spring
• Used on: T27 and T29 processors

Compatibility

The product page names the T27 and T29 processors for this spring. The page does not list the spring length, the wire size, or the model year. Therefore, measure the old spring, and confirm the part with your dealer before you order.