Description

Overview

The Log Lift Table with Infeed is a log lift table for the T27 Firewood Processor. It connects with any T27 Firewood Processor, so you can bring logs up to the machine with less manual lifting. Therefore, the loading step stays simple from the first log to the last.

Here is how the log lift table works. First, roll a log up onto the deck. Next, use the hydraulic control lever to lift the log. Then, use the second lever to feed the log into your processor.

Hydraulic log lift table for steady loading

For example, a heavy round can be raised to feed height and then fed in with the second lever. Also, the lift and infeed steps happen at one station. Therefore, you spend less time moving each log between the ground and the processor.

Key features

• Hydraulic lift controlled by a dedicated lever
• Second lever for hydraulic infeed into the processor
• Roller deck for rolling logs up onto the table
• Connects with any T27 Firewood Processor
• Lifts 800 lbs according to the listed specifications

Also, the lift and feed steps follow one routine. Therefore, you can repeat the same cycle for every log in the batch.

Specifications

Confirm these figures before you order. The list repeats the numbers from the product page.

• Height to drive roller: 34 in
• Overall size: 56 1/2 in long x 51 in wide
• Roller width: 15 1/2 in
• Lifting capacity: 800 lbs
• Unit weight: 355 lbs

Compatibility

The Log Lift Table with Infeed is made for the T27 Firewood Processor. Therefore, confirm your machine is a T27 model before you order. The table connects with any T27 Firewood Processor, according to the product page.

Log lift table fit check

First, confirm your processor model. Next, compare the 34 in drive roller height with your loading area. Then, check the 56 1/2 in by 51 in footprint against your space. For the full firewood processor line, see our NorthForest T29FHC firewood processor page. To learn more about the machine type, read the Wikipedia article on firewood processors.