Description

Overview

The Chainsaw Blade is an OEM chainsaw blade for the T27 and T27 FHC. It is a replacement part, so match it to your saw model before you order.

A blade is the guide bar that holds and guides the saw chain. Therefore, a worn or bent bar can make the chain cut crooked. Replace it with an OEM part to keep the cut straight.

Chainsaw blade for T27 cutting work

For example, check the bar for wear before each shift. Then, clean the groove so the chain runs freely. Finally, fit the replacement blade and set the chain tension as your manual describes.

Key features

• OEM chainsaw blade part
• Built for the T27 and T27 FHC saws
• Replacement guide bar for routine service
• Listed as a single replacement part

Also, keep the blade and chain as a matched pair. Therefore, the cut stays consistent over time.

Check the bar groove, the chain, and the tension after each change. This routine keeps the saw cutting straight and reduces wear on the drive.

Specifications

Confirm these figures before you order.

• Part type: OEM chainsaw blade
• Model fit: T27 and T27 FHC

Compatibility

This part is listed for the T27 and T27 FHC. Therefore, confirm your saw model before you order. Do not fit it to other models without checking first.

Fit check for the blade

First, read the model on your saw. Next, match it with the T27 or T27 FHC listing. Then, compare the blade with the old part before you fit it. For a related chain part, see our NF-T29-Chain product page. To learn more about the saw type, read the Wikipedia article on chainsaws.

If you are not sure which saw you own, read the model plate and compare it with the T27 or T27 FHC listing before you order.