Description

Overview

The NF-Ripper 25mm Pins is a heavy-duty ripper tooth for mini excavators. If you need a ripper 25mm pins tool for hard digging, this tooth gives you focused digging power. It concentrates force into a small contact area for maximum penetration.

Ripping helps when the ground resists a standard bucket. This tooth is ideal for breaking frozen ground, compact soil, tree roots, and concrete. Therefore, you can tackle tougher jobs without stressing your bucket or machine. Work in gradual passes for smooth and controlled operation.

Ripper 25mm pins for tough ground

Start with light passes to test the tooth on your ground. Then increase the depth as you gain control. This method keeps the work steady and reduces strain on your machine. For background on the attachment type, read the Wikipedia article on excavator attachments.

Key features

• Heavy-duty mini excavator ripper tooth design
• Focused digging power in a small contact area
• Breaking frozen ground, compact soil, tree roots, and concrete
• High-strength, wear-resistant alloy steel
• 1 in (25 mm) pin size

Each feature supports controlled digging. The small contact area focuses your machine’s power on one point. Also, the material is listed as high-strength, wear-resistant alloy steel. Because the pin size is listed, you can check the fit before installation.

Specifications

• Pin Size: 1 in (25 mm)
• Dipper Gap: 3.5 in (90 mm)
• Pin Center Distance: 3.5 in (90 mm)
• Tooth Length: 12.6 in (32 cm)
• Material: High-strength wear-resistant alloy steel
• Compatibility: Rhinoceros XN08, XN10-8, XN12-9 and most mini excavators with 1″ pins

Review these specifications before you order. For example, confirm the 1 in (25 mm) pin size on your machine first. Then compare the dipper gap and tooth length with your setup. A quick check now prevents fit problems later.

Compatibility

This ripper tooth is compatible with Rhinoceros XN08, XN10-8, and XN12-9 machines. It also suits most mini excavators with 1″ pins. The listed pin size is 1 in (25 mm), so check your machine before you buy.

Ripper 25mm pins fit check

First, check your machine model against the list above. Next, confirm that your excavator uses 1 in pins. If both match, this tooth is a practical choice. In addition, compare your setup with the dipper gap and pin center distance listed in the specifications.

For more details on compatible machines, visit our Xiniu and Rhinoceros excavator models page. You can compare machine options there before you choose your attachment.